的HYDROMETTE CM-P PRO MOISTURE ANALYZER水分分析仪

<![CDATA[The Hydromat CM-P Pro is a device for determining the dampness of hardened building materials and various other materials using the calcium carbide method. The use of this measuring technique is recommended by various specialist associations for a range of measurement tasks and has thus been well known for years in practice alongside electrical measurement.
The Hydromat CM-P Pro is easy to use. All measurements can be made directly on the object using the tools contained in the carrying case and enable rapid information to be obtained concerning the current state of dampness.
The case set is more extensively equipped however. Amongst other things it contains the Hydromette Compact B moisture indicator to reduce the number of individual CM measurements necessary, to scan larger surfaces quickly and efficiently and to achieve a significantly higher level of test reliability. The preliminary test unit works non-destructively using a high frequency field.
By means of the useful pestle, the material under test can be crushed and quickly prepared directly in the pressure flask while preserving the dampness.
The decision as to whether a floor or wall surface is ready for covering, for example, can be made immediately.
So the CM-P Pro is particularly suited for parquet reclining or floor tiling contractors, construction companies, architects, or surveyors.
该HYDROMAT CM-P Pro是一个装置，用于确定使用电石方法硬化建材和各种其它材料的除湿。使用这种测量技术的建议通过各种专家协会为一系列的测量任务，因此被公知多年实践中沿着电气测量。
所述HYDROMAT CM-P Pro是易于使用。所有的测量可以直接使用包含在携带用箱的工具在对象上进行，并能够快速信息要关于化湿的当前状态获得。
此案集更广泛然而齐全。除其他事项外它包含Hydromette紧凑乙湿度指示器，以减少所需的单个的CM测量的次数，以扫描较大的表面迅速和有效地和以达到测试可靠性显著更高的水平。初步试验装置的工作原理非破坏性利用高频场。
由有用杵的装置，被测材料可以被粉碎，并迅速直接制备在压力瓶中，同时保持化湿。
作为到地板或墙壁表面是否准备好覆盖，例如，可以立即作出的决定。
因此，CM-P Pro是特别适用于实木复合地板倾斜或瓷砖地板承包商，建筑公司，建筑师或测量师。
 

Measuring Range

Structural Moisture:
0.30 to 7.50 CM-% using gauge readout
0.14 to 22.90 CM-% using conversion table
 

Features

• Particularly compact pressure cylinder
• Specially shaped cylinder bottom
• Variable sealing system
• Small sample quantity (e.g. 20/50 g)
• Case size: approx. 500 [L] x 420 [W] x 125 mm [H]
• Weight of case: complete approx. 8.960 kg

The complete case set includes:

• Pressure cylinder with lid and PREMIUM gauge
• Manual pestle
• 20 calcium carbide vials
• 5 test water vials
• Protective gloves
• Protective glasses
• Debris tray
• Digital timer
• 20 PE bags
• Flat chisel
• 1000 g mallet
• Paint brush
• Duster
• Bottle brush
• Elektronische scale
• Weighing tray
• Ball set
• Sample spade
• Replacement gaskets
• Operating insructions
• Carrying case P and
• Hydromette Compact B structural moisture pre-tester (order code 2030)

]]>